If you have been referred to use The DigniCap Scalp Cooling System, it is because your doctor believes you may be a good candidate for scalp cooling. Your provider will give you everything you need for your first DigniCap treatment. It is important that the silicone cap is fitted very closely to your scalp as any air trapped between the scalp and the cap may negatively affect the cooling and results.


Before Your First Treatment

It is important for you to watch both of the DigniCap Instruction videos before going into your cap fitting. Watch the complete videos several times until you are familiar with the capping process.

DigniCap Instruction: Fitting the Silicone Cap
DigniCap Instruction: Fitting the DigniTherm Outer Cap

Click HERE to watch the videos on our Patient Resources & Instruction page.

DigniCap Sizes and Fit

Your hospital will provide the 2 caps needed for treatment.

  1. DigniCap (silicone inner cap)
  2. DigniTherm (neoprene outer cap)

Both caps come in 4 sizes: XS (red), S (blue), M (green), and L (yellow)


After completion of the post-infusion cooling time, the cooling cap remains on for another 5-10 minutes to allow the temperature to slowly increase back to room temperature and diminish discomfort.

Please note that the content of this website is not intended as professional medical or healthcare advice and should not be construed as a substitute for professional healthcare advice, or services from a qualified professional healthcare provider familiar with your unique situation. This content is intended solely as a general product and corporate information.

10925 Estate Lane, Suite 185
Dallas, TX 75238
+1 877-350-2150

Dignitana AB
Traktorgränden 3
226 60 Lund, Sweden
+46 46 16 30 90